Tips For Building in Remote Locations
Home » Uncategorized » Tips For Building in Remote Locations
Tips For Building in Remote Locations
Every aspect of transport, materials, access to utilities and good design should be considered. Many times, future homeowners purchase lots of land, only to discover that for any of these above issues, or other restrictions that are imposed by townships or the ministry, are unable to build what they planned to build or even construct in the first place. A desirable site has ease of access, great topography, and water accessibility, as well as potential for utilities. The location of the land, or topography, often is a major factor in the building's design. The most important thing is to avoid build a lot of homes the land in areas that are low lying, as the soil tends to be unstable, and any future flooding could damage your home. Think about the access to water accessible, is it public as well as privately-owned. Are there any costs for its use, and is sufficient to meet the requirements of a barge that could be used or not use to transport material. Is the access navigable. For example the lake that has numerous floating logs cannot be accessed by floating plane. The utility implications of weeping systems as well as water supply and electric generators must be thought of. Water supply from fresh sources First and most important is having a reliable supply of fresh drinking water. This is what builders refer to as "potable water". 1. If heavy equipment and trucks are able to make it onto your property, the chances of a drilled well are extremely limited. However, there is a tiny core drill machine availablethat is mobile, and capable of drilling a 2" wide well. One issue with this kind of well is the inability pumping the water up to the surface. The pumps are usually restricted to a depth of approximately fifty feet. Once you have a storage "head" of 20 feet, then the well must have reached the water table at least thirty feet or less below the surface. 2. Another alternative can be a dug-well. This type of well usually has a lower quality of water however, it is much simpler to put in in difficult spots. It's essentially a hole that is dug up to four feet below the level of the water table in order to permit storage of sufficient water. 3. If you live near a lake or stream You could be able to use the water directly from its source. There is also a question of water quality and it could be necessary for the Taiwan Auto Parts installation of water filtration equipment or treatment systems. The benefit of a stream is the possibility of installing a water powered ram pump that can be equipped to pump water to higher altitudes. This type of pump requires an amount of maintenance, as well as a constant flow of water in order to function effectively. 4. In the end, if you're lucky enough, you might be blessed with a spring or an artesian water well. They are reliable, and a reliable source of fresh drinking water. If you do, you must consider weather or not you will utilize a pumped pressure system or a gravity-fed system. If an artisan well, spring or another water source is located over your home, a gravity system could perhaps eliminate the need for any mechanical pumps that require the use of an outside source of energy at all. The majority of builders choose to use gravity systems. This includes a large storage tank located approximately 15' above the highest plumbing outlet. Most often, they design an installation to ensure that the system will fill itself up from gravity water sources, or is pumped occasionally to fill the storage tank. This is the least expensive option, which provides very satisfactory results. Sewers and waste systems In the case of disposal of waste products like dishwater, showers or toilets should be carried out in compliance with the codes and laws. This may require the installation of a septic tank, or an approved waste handling device. Or you could simply build an outhouse. However, the decision is entirely yours. In the construction industry there are two types of wastewater. Grey water, which comes from dishwater, bath or shower water, and sump pumps and sanitary wastewater, which is mostly derived from toilets. 1. If you enjoy all the conveniences of home and want to make your home more comfortable, you should think about installing an septic tank. This type of system is the most costly. The weeping beds must be installed in conformance to the environmental laws that require the import of specific gravel or filter sand. Tanks made of plastic are in the market that can be moved to remote sites, or you can construct the tank yourself, however, it will require a professional design. The advantage is an independent robust, reliable system that requires very little maintenance. It is designed to last for the lifetime of the structure and manage both sanitary and grey water waste. Secondary systems can be made up of outhouses and chemical or biological toilets coupled with a greywater treatment or septic system. Grey water systems can be cleaned by mechanical means, or via the use of weeping pipes placed beneath in the ground (consult your local Ministry of Environment concerning the specific regulations to be followed). 2. If you're happy with an outhouseand are considering the possibility of a separate grey water system, this is the cheapest route to follow. Outhouses can be built to be stylish and innocuous, however without secondary heat, can be very cold in the mornings, particularly during the winter months. 3. Toilets made of chemical or biodegradable are used to handle waste equipment and must meet certain environmental or safety requirements before they can be put in the marketplace. They are a relatively cheap option for an indoor toilet and many guarantee to be odorless (which actually has proven itself by me). Some require electric motor and fans, and some are energy free mechanical. They are easy to install and maintain with only a few seasonal maintenance. 4. Grey water systems, when combined in conjunction with biological toilets or outhouses tend to be the system that are most popular. Grey water systems are typically a series of weeping pipes placed in an earthen bed. They connect to the structure via the distribution box. Do not, under any circumstances try to connect a toilet with these systems since they were intended for water that is free and solids could block up the pipes. Grey water weeping systems are maintenance free and require only a little expense and effort to install. Of the threeoptions, I'd recommend the installation of a toilet with a biological system and grey water system. This will provide indoor services as well as lower expenses, and is a good option for future years. Electricity Of all the modern conveniences we can enjoy, they all depend on electricity. Electricity plays a very important part in our contemporary lifestyle and is so vital that we feel the need to incorporate it in the majority of our construction projects. We tend to forget that electricity powers our pumps, fans lights, lighting devices, entertainment systems and other mechanical appliances, that operate in silence in our homes. In Isolated buildings, it is used primarily to power pumps, lights and fans, essential to the proper operation of the mechanical systems in the building, as for providing enough power to operate televisions, radios computers, heating pads kitchen appliances, and other conveniences that are not considered as part of the building's resource requirements. There are several means of getting power, including fuel fired generators for active power, as well as solar or wind powered generators for passive power. Active power is, in essence power that is available to you, at your convenience, so long as you provide an energy source. Passive power can be accessed only in the event that certain conditions, specific to the kind of power source employed are met (i.e. solar collectors work only on daytime days with sunshine). Passive power is generally available in 12-volts and although expensive it is possible to find a variety of products such as appliances, mechanical equipment, and appliances that can be used with this kind of power source. Also, converters are available which will convert the 12-volt to 120 volts, which allows for the usage of everyday household items and mechanicals. Also these passive systems cannot currently provide continuous as they do not supply the massive amount of electricity generated by generators that are fuel-powered. In the case of passive systems, owners should be aware of and track their power consumption to ensure sufficient electricity to run any necessary mechanicals for example, furnace fans or water pumps.  

Leave a Reply

Your email address will not be published.